GeeWhiz®
Condom Catheter
Instructions for use
Note: We recommend downloading these
instructions as a
printable
Adobe Acrobat PDF file by
clicking here
It may take a few moments to download, be patient. This file is 1.4MB
Figure 1. GeeWhiz® Condom Catheter System
Selecting The Correct Size Of The GeeWhiz Condom Catheter
Prior to using the GeeWhiz Condom Catheter, select the “CORRECT SIZE” to best fit your needs. Available condom sizes are: 29 MM, 32 MM, 36 MM and 41 MM. Use the GeeWhiz Condom Sizer™ template and follow instructions for best results. Make a record of your size for future reference and ordering.
NOTE: You may download, print, cut and use the Sizing Guide shown below from our website, www.urinedevice.com Download Chart and print at 100%. Or if you prefer, call 800/639-9323 and we will gladly mail you a full size Sizing Guide at no charge.
Cut along dotted lines. Place openings over penile shaft behind the glans or head of penis to select correct size.
Sizing Guide:
Below is for reference.
Please download the properly sized
PDF file for accuracy.
|
29 MM (1.14 Inches) |
32 MM (1.26 Inches) |
36 MM (1.42 Inches) |
41 MM (1.61 Inches) |
CUT OUT STRIP. WRAP AROUND SHAFT OF PENIS. USE SIZE CLOSEST TO ARROW TIP
TO APPLY THE GEEWHIZ
CONDOM CATHETER
YOU WILL NEED THE FOLLOWING ITEMS
One GeeWhiz Daily Pak™ containing:
- 1-GeeWhiz® Condom Catheter with male QuickSnap™ nozzle in tip
- 1-GelStrip™™ silicone adhesive strip
- 1-SecureStrip™ Wrapping Tape
- 1 Length of connector tubing
- Leg Bag or Bedside Drain Bag (not Shown)
It’s As Simple As 1, 2, 3!
Quick Reference Guide for Applying the GeeWhiz® Condom Catheter
Refer to Instruction Booklet & Read Complete Instructions Before Using
Product
-
Remove both plastic liners from the GelStrip™ adhesive gel and place
the GelStrip™ on the surface of the penis behind the glans. While
applying a slight tension to the GelStrip™, wrap it completely around the
outside of the penis. Overlap the GelStrip™ and press it into place
around the penis – DO NOT CUT!
NOTE: Application Method Differs With The Non-Circumcised Male. The Foreskin Must First Be Pulled Forward Over The Glans Of the Penis Before The GelStrip™ Is Wrapped Around The Penis Behind The Glans!
-
Place
the head of the penis into open end of condom. Unroll the condom
onto the penis, over, and all the way across the GelStrip™ until
the rolled end of the condom is behind the edge of the GelStrip™
nearest your body. Squeeze the condom around the circumference
of the GelStrip™ to insure complete contact and a good seal.
-
Remove the protective liner from the SecureStrip™. Center
the tape on the outside GelStrip™ “Bump” surface of
the condom over the GelStrip™ “Bump.” While applying a slight
tension to the tape, wrap it completely around the outside of
the condom – DO NOT CUT!
CAUTION: Do not wrap so tightly as to restrict the flow of urine or blood.